Preparing to work in 3 steps

To begin work on the guitar, should have 3 basic elements:

1. The model that we will make
2. Draft guitar in scale 1:1
3. The material from which the guitar making

First of all, we should decide which brand and model guitar we make. Since that decision determines the choice of materials (wood and electronics).The wood, I wrote earlier, that the wood must be dry (less than 12% of the absolute humidity).
Here I choose the most hand-built electric guitar and it's certainly a model Fender Stratocaster.Model Fender Stratocaster, mostly built in the model at all. To me it is the most popular guitars today. Construction should be divided into two parts, making a neck guitar and guitar body. We will build the body of the guitar from 3 parts, from the alder. Alder planks dimensions 500 x 120 x 50 agglutinate with Titebond glue and firmly tighten constraints, and kept at room temperature for 24 hours.Once dry, stuck a piece cut out of the body with the best will in the band saw to shape the next draft. We cut to 1/2 cm more to form a finely groomed by milling or sanding paper.Using a machine for planing body will attenuate to 45 mm thick.This will be done with the rough shape of the guitar body.  Making guitar neck is much more complex job of making the guitar body. We use maple neck and rosewood . Maple will be cut to the size of 750 x 120 x 30  Making guitar neck is much more complex job of making the guitar. For we use maple neck and rosewood (rosewood). Maple will be cut to the size of 750 x 120 x 30 mm. Operation making neck are quite comprehensive so I'll describe the picturesque whole operation of making neck.

 Neck of an electric guitar is the most important part of the electric guitar.


 Neck guitar differs from the type of guitar and to its purpose. Thus, the neck of the bass guitar and is generally longer and thinner for rhythm or solo guitar and shorter. However, making the neck for an electric guitar should be given maximum attention, because of the whole gate depends guitar.

The neck of the guitar in which there is a mechanism for winding wires called the headstock, depends on the shape of the guitar. So there are models of the legendary Fender Stratocaster and Telecaster, and various models of Yamaha and IBANEZ's productions.

Guitar neck is made of maple slab on which the thresholds FINGERBOARD, due to the load at which the moving fingers when playing is usually made of rosewood

Rosewood is not a tree, it is the common name for exotic wood species that are very strong. The most famous mahogany, ebony, rosewood.

The neck of the guitar is fitted steel rod that prevents tension neck strain due to bending wire. Rod has adjustable by screws. Neck with heavy bolts and plates attached to the guitar body.



Second One of the most important parts of the neck are the thresholds. The thresholds are set depending on the length of the neck and the number of fields on the guitar.

Length scale is the distance between the zero threshold and horses, usually expressed in inches or cm. Usually a length of 600 to 700 mm. 12 guitars threshold must be exactly in the middle of the scale, otherwise you can not adjust the intonation of the guitar.

 Once dry, stuck a piece cut out of the body with the best will in the band saw to shape the next draft. We cut to 1/2 cm more to form a finely groomed by milling or brusog paper.

Model Fender Stratocaster, mostly built in the model at all. To me it is the most popular guitars today. Construction should be divided into two parts, 

Decorating your workshop

To keep your workspace neat and functionally active, layout tools, machinery, equipment and materials must be effectively distributed. The machines should be so arranged that each specifically allowed unrestricted access. Cables for connection should be above or behind the machines that would hinder access and operation. The drain cleaner must be performed outside the workspace of the work area. Hand-held power tools must be the best in cabinets or on shelves, and the desk has to be the only tool you currently need. Certainly not advisable to have more tools on the table and that their cords mixed and intertwined. Material used (wood) is best stored outside the workshops unless workshop is quite spacious. It is optimal that the workshop only one piece of material of the current work. .Hand-held power tools must be the best in cabinets or on shelves, and the desk has to be the only tool you currently need. Certainly not advisable to have more tools on the table and that their cords mixed and intertwined.

This is, without doubt prohibited

That there are rules and customs that something may or must be, so there are no regulations or even . So for the safe operation of the workshop prohibited: work with tools and machines that are defective.

Machinery and electrical tools and machines must be grounded. All electric machines must not be in direct contact with the water or near the water.  Quality of ground equipment or electrical outlets can test yourself.  Insulated wire with bare ends of the short circuit in the outlet line phase with earthed water. If the ground properly, GFCI breaker would currently be excluded from the power grid. WARNING! Do not do this if you're not sure what you want and if you have never worked with electricity.!

Never use a machine tool or if it is a part of the cable or peeled if you see bare wires. Unprotected contact with the wire can be mortally dangerous